High stiffnesslight weight but stiff that can replace stainless steel
High tensile strength
High burst pressure
Excellent impact and wear resistance
Excellent creep and fatigue resistance
Exceptional torsional stability
Heat resistance
Low flammability value
Lubricity
Resistant to gamma radiation
Biocompatible
Thermoformable
● Available wall thickness is up to 0.05mm (Sub-Lite=Wall®)
● Special form extrusion including Multi-lumen® and Lay-Flat® are also available.
● PEEK™’s natural color is amber; however, color is available.
Dimensions (reference)
Unit (mm)
ID
OD
Rated pressure*
0.076
0.508
13.78MPa
0.127
0.508
13.78MPa
0.254
0.508
13.78MPa
0.076
1.575
34.47MPa
0.127
1.575
34.47MPa
0.178
1.575
34.47MPa
0.254
1.575
34.47MPa
0.508
1.575
34.47Mpa
0.762
1.575
34.47Mpa
1.016
1.575
34.47Mpa
1.397
1.575
34.47Mpa
1.575
3.175
34.47Mpa
2.032
3.175
20.68Mpa
*
Maximum recommended pressure
Note:
● Dimensions and tolerances in the table are only a guide.
● We don’t have stocks for this product. All PEEK products are custom-ordered.
MaterialPEEK
Working temperature260°C
Recovery temperature330°C～ 360°C
Shrink ratio25%
Main features
Wear resistance
Super excellent gamma-ray resistance
Continuous usage under high temperature
Extends usage life of the covered material
Excellent contact property on metallic materials
Selection of colors
Main performance attribute
PEEK shrink tubing has high protection and contact properties that enables the covered materials to resist wear, high and low temperature, high pressure, and interference from dielectric substance.
● Recovered wall thickness: 0.004 to 0.009 inch ● Standard length: 4ft Custom-order is available
Dimensions (reference)
Unit (inch)
AWG nominal size
Expanded ID (min)
Recovered ID (max)
Recovered Wall thickness
Minimum
Standard
Maximum
17
0.038
0.027
0.005
0.007
0.009
16
0.045
0.032
0.005
0.007
0.009
15
0.055
0.039
0.005
0.007
0.009
14
0.085
0.06
0.005
0.007
0.009
13
0.092
0.065
0.005
0.007
0.009
12
0.101
0.072
0.005
0.007
0.009
11
0.112
0.08
0.005
0.007
0.009
10
0.125
0.089
0.005
0.007
0.009
9
0.137
0.098
0.005
0.007
0.009
8
0.16
0.114
0.005
0.007
0.009
7
0.174
0.124
0.005
0.007
0.009
6
0.2
0.143
0.005
0.007
0.009
5
0.221
0.158
0.005
0.007
0.009
4
0.252
0.18
0.005
0.007
0.009
3
0.277
0.198
0.005
0.007
0.009
2
0.316
0.226
0.005
0.007
0.009
1
0.349
0.249
0.005
0.007
0.009
0
0.392
0.28
0.005
0.007
0.009
（注）
● We don’t have stocks for this product. All PEEK shrink products are custom-ordered.
